ultrasonic cleaner supplier Kejiemeng teaches you how to set the frequency of the ultrasonic cleaner . Generally speaking, the frequency of the ultrasonic cleaner during use often determines the cleaning effect of the ultrasonic cleaner. The ultrasonic cavitation threshold is closely related to the frequency of the ultrasonic cleaner. The higher the frequency, the higher the cavitation valve. That is to say: the lower the frequency, the easier cavitation is to occur, and at low frequencies, the liquid has a longer time interval for compression and thinning, allowing bubbles to grow to a larger size before disintegrating. Therefore, we can enhance the cleaning efficiency by increasing the high-altitude intensity. The frequency of the ultrasonic cleaning instrument is the core of ultrasonic cleaning machine technology. We all know that noise will be produced when the working frequency is very low (within the range of human hearing). When the frequency is below 20kHz, the working noise not only becomes very loud but may also exceed the safety noise limits stipulated by occupational safety and health laws or other regulations. In applications where high power is required to remove dirt without considering damage to the workpiece surface, a lower cleaning frequency within the range of 20kHz to 30kHz is usually chosen. The cleaning frequencies within this range are often used to clean large, heavy parts or workpieces made of high-density materials. Kemeng provides piezoelectric transducers of 28KHz, 40KHz, etc. Based on the principle of ultrasonic cleaning machines, Guangzhou Kejiemeng Experimental Instrument Co., Ltd. provides a series of low, medium and high frequency ultrasonic cleaning instruments. There are 28kHz, 40kHz, 80kHz, 100kHz and 130kHz higher ones. When cleaning extremely tiny particles, a high-frequency ultrasonic cleaner can be selected.

Organized and published: Ultrasonic cleaner manufacturer Kejiemeng http:www.gzkjm.com