Ultrasonic cleaner is to use ultrasonic waves to clean objects. Ultrasonic waves have cavitation effects in water, which can accelerate the flow rate of water to form a stream of water, thereby impacting the cleaning agent and causing contaminants to fall off, achieving the cleaning purpose. According to the investigation by Beijing Ultrasonic Cleaning Machine Company, the main functions of the ultrasonic cleaning machines currently on the market are cavitation and direct flow.

    The function of an ultrasonic cleaner is to clean items, so the cleanliness requirements for the ultrasonic cleaner itself should also be higher. Then, how can the ultrasonic cleaner clean itself quickly and thoroughly? The editor of Beijing Ultrasonic Cleaning Machine Company shares with you how to quickly clean the titanium rod filter element of the ultrasonic cleaning machine.
     
    The titanium rod filter element is an important component in the ultrasonic cleaning machine . The equipment relies on it to remove various impurities. If the filter element is not applicable temporarily, it can be stored in the filter. However, when reusing, it must be thoroughly rinsed clean. However, if the filter element is not used for a long time, it can be rinsed clean with water and dried before being stored.
       
    There are two ways to clean titanium rod filter elements. One is physical cleaning. The prerequisite for physical cleaning is that the titanium rod filter element is relatively clean and has not adhered to any difficult-to-clean substances. The second is chemical cleaning. We can use some alkaline or acidic cleaning agents to clean substances that are difficult to clean. The titanium rod filter element after cleaning needs to be dried and stored properly.