, < strong > < a href =" http://www.kejeme.com/news/shdt/1232.html "> ultrasonic cleaning machine < / a > < / strong > power supply and electric heater power must have a good grounding device.
3. For cleaning equipment with heating devices, it is strictly prohibited to turn on the heating switch when there is no liquid
( iron )
220V/50Hz power supply and be equipped with 2000W above voltage stabilizer.
Seven. Each time when changing the liquid, wait until the ultrasonic wave is activated before washing the items.
,   Combining the welding of the vibration head nail with the adhesive and choosing an adhesive with a lower curing shrinkage rate can reduce the bonding stress of the vibration element. (Recommended special imported glue)
2  Clean the bonded surfaces with solvents such as acetone.   (Grind and clean the stainless steel adhesive surface)
3  Establish an impedance control process for the bonding process to reduce the bonding impedance of the oscillator and improve the electro-acoustic conversion efficiency of the oscillator.
4  Establish a bonding impedance testing process for oscillators after adhesive curing to enhance the uniformity of energy load for each group of oscillators. (Using purer solder)
5  Enhance insulation measures after the installation of the oscillator electrode. (Insulating paint on the surface)
6  Hot water (40-60℃) state to debug the machine.
7  Reasonably control the operating temperature of the machine. It is recommended to keep it lower than   80℃  condition.
8  paste 20 Test the machine after hours or when it is dry. < / font > < / span > < / span > < / p > < p class = "p0" style = "margin - top: 8.7 pt; background: rgb(255,255,255); margin-bottom: 8.7pt; Linear height: 28.5pt; text-align: justify"> Ultrasonic cleaner : http://www.kejeme.com/news/gsxw/1242.html