Everything in the world will break down one day. Just as the moon waxes and wanes, people experience joys and sorrows, partings and reunions. Of course, ultrasonic cleaner is no exception. But please rest assured, faults are not scary as long as we know how to repair and maintain them.
    Here are the common handling methods for cleaning machine malfunctions summarized by the editor for everyone:   When the power switch of the ultrasonic cleaner is turned on, the indicator light does not light up and there is no ultrasonic output.
    Reason:
 "     A. The power switch is damaged and there is no power input.
      B. The ACFU fuse has blown.
    After the power switch of the ultrasonic cleaner is turned on, the indicator light is on, but there is no ultrasonic output.
    Reason:
 "     A. The connection plug between the transducer and the ultrasonic power board is loose.
      B. The DCFU fuse blew.
      C. Fault of the ultrasonic power generator;
      D. Transducer failure.
    3. The DC fuse (DCFU) of the ultrasonic cleaner has blown.
      Reason:
 "     A. The rectifier bridge stack or power transistor is burned out;
      B. Transducer failure. .
    After the power switch of the ultrasonic cleaner was turned on, the machine had ultrasonic output, but the cleaning effect was not as expected.
    Reason:
 "     A. The liquid level of the cleaning solution in the cleaning tank is inappropriate;
      B. The ultrasonic frequency coordination was not properly adjusted;
      C. The temperature of the liquid in the cleaning tank is too high or too low;
      D. Improper selection of cleaning solution;
      E. Aging of the ultrasonic generator.
    Hurry up and learn these ways to handle faults of ultrasonic cleaners, so that they can serve you better.