for ultrasonic cleaning machine , several common faults have occurred. Do you know what they are? Here is a summary for everyone. 1. The oscillator comes off the adhesive. Our transducer adopts a dual guarantee process of bonding and screw fastening. Under normal circumstances, this situation will not occur.   2. If the ultrasonic oscillator gets damp, a megohmmeter can be used to check the plug connected to the transducer. By checking the insulation resistance value, the basic situation can be determined. Generally, the insulation resistance should be greater than 5 megohms. If the insulation resistance value cannot be reached, it is generally because the transducer is damp. The entire transducer (excluding the powder-coated shell) can be placed in an oven set at around 100℃ for drying for 3 hours, or a hair dryer can be used to remove the moisture until the resistance value returns to normal. 3. Perforation of the stainless steel vibrating surface: Generally, after the transducer has been in full-load operation for 10 years, perforation of the vibrating surface may occur. For more questions, you can call the professional ultrasonic cleaning machine manufacturer and receive timely and professional answers. 4. If the transducer oscillator sparks and the ceramic material breaks, it can be inspected by combining the naked eye and a megohmmeter. Generally, as an emergency measure, individual damaged oscillators can be disconnected without affecting the normal operation of other oscillators. For the above common problems, in order to prevent everyone from causing malfunctions of the ozone disinfection machine due to operational errors, how exactly should they be solved? Please contact our technical department and they will solve it for you. < / p > < p > ultrasonic cleaning machine: < a href = "http://www.kejeme.com" > www.gzkjm.com < / a > < / p >