At present, Kejiemeng has developed an increasing number of cleaning machine models, and each model has its own different cleaning methods. So here, let's allow the editor to list them one by one for everyone. Spray cleaning is a cleaning method in which spray pipes are installed in the cleaning tank and the cleaning solution is sprayed onto the objects to be cleaned in the gas phase. Air jet cleaning is a cleaning method in which air jet pipes (multiple nozzles) are installed in the cleaning tank, and the cleaning solution is sprayed onto the object to be cleaned by gas.
Vacuum cleaning
Negative pressure is generated in the cleaning tank. Due to the vacuum reduction, the detergent can better penetrate into the objects to be cleaned and the crevices. When used in conjunction with ultrasonic waves, the cleaning effect will be greatly enhanced.
Rotating cylinder cleaning
Install a rotating device in the cleaning tank to rotate the cylinder and stir the objects to be cleaned simultaneously. It is often used in combination with jet cleaning and ultrasonic cleaning. Ultrasonic cleaning is a method in which ultrasonic transducers are installed in the cleaning tank to generate ultrasonic energy (thousands of atmospheres of impact waves) to thoroughly clean all the objects to be cleaned.
Shaking cleaning
Install a shaking mechanism in the cleaning tank, load the object to be cleaned, and make it move in the cleaning tank. It is often used in combination with jet and ultrasonic cleaning. Immersion cleaning is a cleaning method in which cleaning solution is added to the cleaning tank and the object to be cleaned is immersed in it. Because it only relies on the chemical action of the cleaning agent for cleaning, its washing ability is weak and the cleaning solution needs to be circulated for a long time.
      For different cleaning objects, different cleaning requirements, different cleaning methods, and different cleaning machine models, Kejiemeng can meet your needs.